Presentation of the solar roller shutter:

The "VRS-500" is a real solar roller shutter mounted on a test frame with a measurement console and an acquisition interface connected to a PC.

With its integrated battery and solar panel, it operates without an external power source. Equipped with a microcontroller and a motor with a pulse sensor, it can distinguish between a blockage and a stop at the end stop.

The test frame allows load testing (e.g., snow) thanks to a pulley system that drives test weights.

Presentation of the "Sustainable Development" subsystem:

The "Sustainable Development" subsystem allows programming the management of temperature, light, heating, and ventilation sensors for a housing management project. All these components are connected to ARDUINO modules.

Presentation of the "Mechanism" subsystem:

The "MECHANISM" subsystem of the "VRS-500" solar roller shutter allows for an in-depth study of its mechanism.

It offers a detailed view of the essential mechanical components, including:

- Measurement of the phase angle between the fixed and moving bearings of the roller.- Access to the transmission gears. - Observation of the thermal insulation of the slats.

Measurement and acquisition interface on PC

- Voltage and current at the photovoltaic cell - Voltage at the battery

- Control voltage (M.L.I) and current at the gear motor

- Output signal from the Hall effect sensor of the blockage detection device

References:

DD//VRS500: Autonomous solar roller shutter

DD//S/SDDVRS500: VRS thermal subsystem

DD//MECAVRS500: VRS500 mechanical subsystem

🍪 We respect your privacy

We use cookies to ensure the website functions properly and, with your consent, to track website traffic or personalize your experience. You can accept, reject, or customize your settings.