Return to the range "Thermal Engineering & Renewable Energy"
Climaflex
Modular platform for studying "residential" and "small commercial" production, distribution and heating / cooling
Modular platform for studying "residential" and "small commercial" production, distribution and heating / cooling
Boilers (Fuel, Gas, Electric, Wood pellets, Sub-station of heating network)
Thermo-dynamic equipment (Heat pump Air / Water and Water / Water)
Thermal regulation
Fluidic circuits (Circulation unit, Expansion tank, Buffer tank, Balancing valves ...)
Measurement (Temperature, Flow, Pressure, Combustion)
Hydraulic and electrical wiring and connecting
Commissioning, settings, balancing and maintenance
Measurements and heat balances, overall and by sub-set
Techno-economic and environmental analysis
Dimensioning the installation
Modularity of the educational platform and many available solutions
Possible mounting on a 3D-cell installed in the workshop or on a frame with fast connections
6kW Electric Boiler: CL10
Condensing oil boiler for heating only: CF10
Low temperature oil boiler for heating and hot water: CF20
Condensing gas boiler for heating only: CG10
Low-temperature gas boiler for heating and hot water: CG20
8kW Reversible air/water heat pump with inverter: PC30
Hot water tank: PC32 (Optional)
Temperature instrumentation (thermocouples) on the refrigeration circuit: PC33 (Optional)
7kW Reversible water/water heat pump with external heat exchanger: PC40
Temperature, flow and pressure instrumentation for exchangers and refrigeration circuit PC42 (Optional)
Hot water tank: PC44 (Optional)
15kW modulating wood pellet boiler: GB30
Hot water tank: GB32 (Optional)
Heating network sub-station: ST10
Temperature instrumentation for exchangers and flow ST12 (Optional)
Primary hydraulic distribution with hydraulic separator: HP10
Primary circuit pump with pressure measurements HP12 (Optional)
Temperature/flow instrumentation HP13 (Optional)
Primary hydraulic distribution without hydraulic separator: HP10
Primary circuit pump with pressure measurements HP12 (Optional)
Bypass with TA primary valve HP22 (Optional)
Temperature/flow instrumentation HP13 (Optional)
Hydraulic distribution to emitters:
Collectors 5 circuits: HS10
Variable flow pump and temperature / pressure / flow instrumentation HS11
Steady flow pump, differential valve and temperature / pressure / flow instrumentation HS12
3-way mixing valve, steady flow pump, differential valve and temperature / pressure / flow instrumentation HS13
6-radiator balancing bench with TA valves on columns: RA20
Temperature instrumentation on columns and radiators and flow instrumentation on columns RA22 (Optional)
TA valves on radiators RA23 (Optional)
Bench with 2 fan coils: VC20
Temperature and flow instrumentation on fan coils VC22 (Optional)
Bench with 6 fan coils: VC30
Temperature and flow instrumentation on fan coils VC32 (Optional)
Air heater bench: AT10
Temperature and flow instrumentation AT12 (Optional)
Ductable water unit bench: GA10
Ductable water unit bench: Temperature and flow instrumentation GA12 (Optional)
Floor heating bench: PV20
temperature and flow instrumentation PV22 (Optional)
Aluminium frame with or without wheels with brakes
3D-cell for assembly and connection: MN10
Structure LxWxH = 4x4x3m with support for pipes and components, to be assembled in your workshops
FR - Climaflex