Presentation :
Hydraulic power pack with gear pump 16bar, 0.5l/min
Inclined mounting bracket for hydraulic components
Technical solutions discussed:
Hydraulic component kit, manual override (Level 1)
- Double acting cylinder, length 58mm
- 4/2-way valve, manual with return spring
- Pressure relief valve with ball valve
- 3-way connection with pressure gauge 0-10 bar (3 quick connectors: 1 female and 2 male)
- Non-return valve
- Needle flow limiter (manual)
- 6-way connection (6 male quick connectors)
- Set of 10 connecting hoses (6 x 520 mm + 4 x 350 mm)
- User and Activity Manual
Hydraulic component kit, manual override (Level 2)
- Spring-loaded safety valve, 3-way, manually controlled
- Single-acting cylinder, length 40mm, with return spring
- 3-way pressure reducer, manual regulation
- Unidirectional flow limiter
- 2/2-way valve, manually operated
- Hydraulically operated non-return valve
- Flow control valve with pressure compensation (hydrostatic valve, manual control)
- 4-way connection (3 male + 1 female with quick connectors)
- Set of 5 connecting hoses x 520 mm
Electro-hydraulic component kit
- Power supply unit with transparent cover (220 VAC/24 VDC, I=5 A, overload and short-circuit protection, on/off switch, on/off indicator light, terminal strip for quick connectors Ø 4 mm
- Control box with transparent cover (4 pushbuttons with normally open / normally closed contact, 1 switch with normally open / normally closed contact, 1 electronic timer with regulation from 0 to 6 seconds, 4 indicator lights, terminals for quick connectors Ø4 mm)
- Relay box with transparent cover (3 relays with 4 contacts each, on/off indicator light on each relay-solenoid, protection diodes, 6 positive voltage terminal blocks, 6 negative voltage terminal blocks, terminal blocks for quick connectors Ø4 mm)
- Cable set Ø4 mm male (14x blue length 50 mm, 14x red length 50 mm, 8x blue length 150 mm, 8x red length 150 mm)
- Set of 3 connectors for solenoid Ø4 mm
- 4/2-way solenoid valve, electromagnetically operated, transparent
- 4/3 solenoid valve, electromagnetically operated, transparent
- 2 roller limit switches (1 normally open, 1 normally closed), transparent housing
References :
HR/6839 & HR/1827 : Minidraulic plates with transparent components: Inclined support and Hydraulic unit with coloured oil.
HR/1951 : Level I component kit for Minidraulics
HR/1952 : Level II component kit for Minidraulics
HR/2008 : Electro-hydraulic component kit for Minidraulics